Parts list Continued -

Upgrade Kit Parts List:

- Electronics Mounting Board   (1)

bulletWood Cross Beams - Short & Long     (1 each)
bulletWood Compression Post  2 15/16"  (1)
bulletRudder Linkage - Rod (1), Ball Links (2)
bullet            Ball Link Sockets (2) & Hex Nuts (2)
bulletAntenna Tube      (1)
bulletVelcro       (1)
bulletStainless Self Tapping Screws 5/16"  (6)
bulletSpectra Rigging Line     (1)
bulletWhite Dacron Corner Patches   (6)
bulletMylar Sticky Back Triangles   (6)
bulletWhite Sticky Dots     (12)
bulletRubber Drain Plug     (1)
bulletEpoxy Pack w/ Thickening Powder  (1)
bulletCA Glue       (1)
bulletCA Glue tip extension    (1)
bulletAllen Wrench      (1)






1) Inventory all parts in the kit to assure nothing is
missing and you can confidently identify each part.


2)  Important Note: Screw identification
There are three different packages of screws:

  1. The small zip-lock bag that contains the basic screws provided by AG to build the kit:
2 Extra large Screws - Round Head 15/16" Long
2 Large Screws - Round Head 1/2" Long
12 Medium Screws - Round Head 3/8" Long
6 Small Screws - Round Head 1/4" Long
12 Flat Screws - Flat Head 3/8" Long
2 Bolts - Round Machine Screws 5/16"Long
    b) In the large electronics bag are two smaller bags containing the screws used to install the servos:
        8 Hold Down Screws - Rd. Head screws 9/16" Long
    c) In the up-grade kit are the screws that fasten the electronics board to the beams and the sail trimming arm to the winch:
       6 Stainless Steel Screws: Rd. Hd. Screws 5/16" Lg.


BACK        NEXT PAGE